A little dive into lighting your bearded dragon.

In this article, I will use references and literature to back up my claims. References are in square brackets [] and are listed at the bottom of the page.

If you know anything about me, you’ll know I work with exotic animal lighting a lot. This means that I should be able to help answer some of your questions about lighting your beardie.

This article is designed to be a really quick guide on beardie lighting. It won’t cover all aspects, and won’t go into all of the detail needed to completely comprehend the minefield of information. We have more information, and can offer a personalised consultation to suit your needs, just contact us for information on this.

I make no money from any recommendations in this article – Tomaskas is not commercially associated with any of the companies that we mention herein. Please shop around to get the best deal for you, and don’t forget to support your local stores where possible.

Bought a setup, and you’re not sure it’s right? Been advised that you should do some research? Read on!

Firstly, we need to recognise that most bearded dragons kept in captivity are the same species – Pogonna vitticeps. In the wild, they live in the arid deserts of central Australia. They live on mainly sand (despite what people tell you!), and they also love to climb up trees!

One thing is for certain, they are an animal that has evolved over millions of years to utilise every bit of sunlight that they can. The sun provides essential UVB, UVA, Visible, and Infrared light – all of which play vital parts in the biology of the bearded dragon. It is when all of these components are combined that we see the true biological effects – and this combination of light is called “full spectrum lighting”.

I could go on for ages about the importance of light, but I already have documents and information about that available on the site – so for now, just know that full spectrum lighting is what we are aiming for – because it’s what bearded dragons have evolved under.

Failure to provide certain sections of this spectrum can cause problems down the line, like Metabolic Bone Disease, lethargy, decreased appetite, and even death.


Buying a “complete” setup

Tomaskas sees a lot of pet shops offering setups to their customers that consist of a single lightbulb. However, this is a much rarer occurrence nowadays in the UK.

This kind of bulb is sometimes called a “combi-bulb”, or professionals refer to it as a “Mercury Vapour Bulb”. These bulbs often claim to offer “UVA, UVB, and Heat” all in one – and whilst that’s technically true, we can’t emphasise enough just how poorly these lights replicate the sun. They simply don’t offer the full spectrum lighting that our bearded dragon deserves.

Many new keepers nowadays will be sold a classic “Beardie enclosure”, and it will come with a heat bulb and some kind of fluorescent tube light. Sometimes these are a great starter – but there are still many shops that sell less-than-ideal setups.

A typical setup often sold in the UK. Some components are ok, but some of the lamp choices are poor.

In the states, a common enclosure sold is a “40 gallon” glass tank with a “dual dome” fixture, containing a simple heat lamp and UVB lamp.

A typical “Bearded Dragon Starter Kit” sold in shops and online in the states. Zoo Med make some great products, but this isn’t one.

Both of these setups aren’t ideal.

We won’t be making a comment on the whole setup in this post, as we want to focus just on the lighting here. The combi-bulbs are a “jack of all trades and a master of none” – and they certainly aren’t nice to look at for us, so imagine what they look like to a beardie! If you’ve ever used one of these setups with the combi-bulbs, you’ll be able to recognise that weird green colour that everything has. Ask yourself, does that look like sunlight?

Even the setups that don’t use a combi-bulb, but still have poor lamp choices, are common in both the UK and the states.

Already got your setup, and it has a combi-bulb, or resembles one of the options described above, and you’re stuck on what to do next? Don’t worry, you’re in the right place.


So, what lights do I need?

At this point in time, the best way to create a full spectrum setup is by using different lamps together – lamps that each specialise in their own thing.

When we mix them all together in one area (the “basking area”), we create a little patch of sunlight in our enclosure that our bearded dragon can bask under and get the benefits from each lamp together. And of course, the exact lamps we choose will depend on the enclosure we are using.

Before we go diving into lights, we need to be sure what kind of enclosure you’re using. For the sake of this article, and there being far too many variables, we’re going to assume you have one of 4 different setups:

  • Type 1 – 40 gallon glass tank with mesh lid (such as the Zoo Med one shown earlier)**
  • Type 2 – Small Vivarium (no mesh lid)**
  • Type 3 – 4x2x2 Vivarium (no mesh lid)
  • Type 4 – 4x2x2 Vivarium (with mesh lid and lights are generally sat above the mesh)

**I highly recommend against these types of enclosure. Really, a 4x2x2 enclosure is the smallest you should go for. However, I recognise that sometimes you don’t have a choice – so I’m going to give you some options to suit these enclosures on the basis that you fully recognise that the enclosure needs changing as soon as possible.

To make matters even more confusing, the closer an animal is to a lamp, the more output they’ll be getting. So for all of these examples, we’re assuming your bearded dragon is 25cm/10″ away from the lamp when they are basking. If your beardie is further away, try giving them a climbing space so that they can get closer to the lamps – after all, they love to climb!

If you have an enclosure or setup that is different to the list above, the recommended lights could be vert different, and you may be best getting in touch directly for a personalised consultation.

Now that you have your enclosure in mind, we can broadly categorise the specialities as follows: UVB, UVA, Visible Light, and Infrared-A. Remember, each of these components plays part in essential biological processes for bearded dragons – but generally we put emphasis on UVB and Infrared-A first, then Visible Light, and then UVA.

So let’s work in that order….


UVB

There are specialised terms for providing the appropriate levels of UVB for animals, and how it is associated with essential Vitamin D3 synthesis. It is generally measured using Ultraviolet Index (UVI) [1] for reptile keeping. But for this article we want to keep it as simple as possible. All we need to know is that bearded dragons in the wild will expose themselves to significant levels of UVB [2].

We do need to remember though, there is a safe limit to the level of UVB we can provide them. We don’t want to give them too much. Just because they come from the desert doesn’t mean that they are immune to the damaging effects of UVB [3].

UVB is something that we can’t see, and neither can bearded dragons. But it does have very important biological effects [4]. Providing UVB is essential for all beardies, but as with all things in life – there’s more than one way to do it!

We recommend using a lamp that creates a nice wide basking area, and the right level of UVB. We will want to provide an area that is similar to the “full sun” that they get in the wild. And as you’ll know yourself, more sun means more UVB! But just as equally, beardies in the wild will shade themselves [2] – so we want to make sure that there is plenty of space for shade too!

Bearded Dragons will lie on a branch and bask, but will also use the shaded areas in their environment.

Tomaskas believes that, at the time of writing, the best way to provide UVB is with a specialised lamp called a T5HO (or T5-HO). There are two brands that are currently recommended, Arcadia and Zoo Med. Both brands make lamps marketed specially towards certain categories of animals – which is perfect. But because these lamps come in a range of wattages, sizes, and strengths – it makes a minefield out of all of the information.

To make matters worse, each of these brands has a different “fixture”, and those fixtures are different in design which means that they output different amounts of UVB! It’s ok though, we’ve made it as simple as we can below.

There is a new product from Zoo Med that provides a nice wide basking area when used inside their Dual Dome Fixture, called the Mega Compact.

As a general rule, I recommend the following:

Type 1 Enclosure – Zoo Med Mega Compact (65W)
Type 2 Enclosure – Arcadia ProT5 with 6% UVB lamp (24W)
Type 3 Enclosure – Arcadia ProT5 with 6% UVB lamp (24W)
Type 4 Enclosure – Arcadia ProT5 with 12% UVB lamp (24W)

I want to repeat: with these lamps, presuming your beardie is 25cm/10″ away from the lamp, they should get the right level of UVB when they are basking.

And before you say it, I’m well aware that the 6% lamps a generally sold as to be used for “forest” animals, and that many online forums and facebook groups say that you NEED a 12%. But that’s just not the case. Unobstructed by mesh, the 6% lamp will provide the correct level of UVB for a dragon 25cm away. We have a new article on this subject here.

But we must warn you, if you are using a different “fixture” or lamp, then the UVB received by your dragon may be seriously reduced – so you may be best getting in touch so that we can discuss a proper way forward for your them.


Infrared

Often mistaken for “heat”, infrared (or IR) is an important part of the full spectrum that all animals utilise for a multitude of beneficial biological processes [5]. You’ve sat by a warm fire and felt the cozy feeling, you’ve stepped out into the sun and got those tingles under your skin – that’s infrared, and beardies get that too!

Because things are never as easy as they first seem, infrared can be split up into different sub-categories – A, B, and C. It’s Infrared-A that we are focusing on here. We’ll just call it IR or Infrared from here on, but know that we’re talking specifically about Infrared-A.

At this point we want to be certain of one thing, supplying Infrared will cause your dragon, and probably your enclosure, to heat up. In this article we are focusing on providing a full spectrum of light – and we are not focused on temperatures. In theory, if you provide the correct levels of IR you should stay within safe temperature in the basking area. Just remember that other factors play a part in basking temperature, such as substrate, airflow, and ambient temperatures.

Luckily, IR is fairly easy to supply – it’s what comes out from “heat bulbs” that you’ve no doubt already seen.

There’s a few different types of heat bulbs, and of course they come in different Wattages – and generally speaking, the higher the Wattage, the higher the IR output.

Normal Heat Lamp
Heat lamps are sold for reptiles in almost all pet shops. You’ll see them on the shelf with lizards on the box. They come in a range of shapes and sizes, and are offered by different brands.

Luckily, we’ve spent a lot of time around heat lamps, so we can advise on some of our favourites. Exo Terra have a good product that we really like, its called the Intense Basking Spot – don’t fret about the name, it’s not nearly as intense or as ‘tight beam’ as it makes out according to our tests. The other lamp we like is the Arcadia Solar Basking Flood, which has a much wider beam and a softer glow. Because they’re so different, they need to be applied differently.

Type 1 Enclosure – Zoo Med Repti Basking Spot (100W)
Type 2 Enclosure – Arcadia Solar Flood (100W)
Type 3 Enclosure – Exo Terra Intense Basking Spot (100W)
Type 4 Enclosure – Exo Terra Intense Basking Spot (150W)

There are, of course, plenty of other lamps that can be used – but the above have both been independently tested by Tomaskas and found to produce the appropriate levels of Infrared when set at the appropriate distances.

Bearded dragons in the wild utilise Infrared to warm up deep tissues, and aid with kick-starting the metabolism.

Halogen Heat Lamp
This kind of lamp is usually more efficient than a normal heat lamp. You’ll find that brands like to advertise if their lamp is a halogen or not. So if it’s not got “halogen” written on the box, then it’s probably not a halogen lamp.

Halogen lamps work much in the same way as a normal heat lamp, but because they’re so much more efficient they often output very high levels of Infrared when compared to a normal heat lamp of the same wattage. One of the biggest problems we’ve found with halogens is that they have very tight beams – but this can be ok for a smaller animals!

To make things even more confusing, the halogen lamps are hugely different in physical size. This is referred to as PAR, and has a number alongside it – such as PAR30 or PAR38. The higher the number, the larger the lamp’s face.

This kind of lamp is widely used. But the thing we see a lot is that they are often dimmed. The problem with dimming such lamps is that you lose the beneficial infrared-a. We have a quick diagram below to illustrate this:

As you dim a lamp, it loses the all-important infrared-a. We want to minimise dimming where possible.

We’ve found consistent results from two main halogen lamp products. Arcadia has a range that are good quality, and a company called 12VMonster also has a range of halogens that have tested positively so far.

I’d recommend the following:

Type 1 Enclosure – Reptile Systems Eco Halogen (50W) or 12VMonster 50W
Type 2 Enclosure – Reptile Systems Eco Halogen (50W) or 12VMonster 50W

Type 3 Enclosure – Reptile Systems Eco Halogen (50W) or Zoo Med ReptiTuff Halogen (50W)
Type 4 Enclosure – Reptile Systems Eco Halogen (75W) or Zoo Med ReptiTuff Halogen (75W)

We want to reiterate here that the halogen lamps are very high output, and they should be monitored to make sure that your enclosure doesn’t get too hot.


Visible Light

Perhaps the most obvious part of the spectrum is the visible part. This is what we can see as colour. It goes without saying that your dragon can see this too.

If you’ve seen a UVB lamp, and a heat lamp, then you’ve probably noticed that they do emit visible light. And sometimes it looks like they are bright. But, we can assure you that they’re not bright at all.

Our eyes play tricks on us – they dilate to let in more light – so things can appear brighter than they truly are.

Our eyes play tricks on us, and they make our enclosures look brighter than they actually are.

We generally measure the “brightness” of visible light with a Lux Meter. When measuring an enclosure that’s using just a heat lamp and UVB lamp, we tend to measure around 4,000Lux. Sounds like a lot, right?

In full sun, it’s normal to get a reading in excess of 120,000Lux! At the preferred basking levels of bearded dragons, we tend to measure around 40,000 to 80,000Lux.

The light does more than just help with vision. Special chemicals play a part in more than just “vision” – there’s a deep field of research that’s focused on something called “non-visual perception” [6]. In short, bright visible light literally “wakes up” the brain and makes it release hormones that kick-start essential bodily functions, like metabolism and sex drive [7].

Bright light kick-starts metabolism in beardies.

A great way of providing bright light is utilising high quality LEDs. This could be done in a few ways.

LEDs are a science in themselves. And recently there’s UVB-emitting LEDs hitting the market to make things even more confusing. At the time of writing this article, such lamps are not recommended – you can read about it on this post.

The main thing to remember here is that it’s really difficult to provide sun-like levels of visible light in a man-made enclosure. We can only try our best.

Loads of the usual names carry LED products that are suitable – Arcadia has a brilliant range called Jungle Dawn LED Bar for example. But Zoo Med, Exo Terra, and some of the other smaller brands also have products that work.

I like the Arcadia Jungle Dawn LED Bars because they can “daisy chain” onto an existing ProT5 fixture, so you can get more light without taking up any extra plug sockets! Such products produce a nice wide area for visible light. Putting one of these alongside your T5 lamp will help to brighten the basking area.

If you prefer more of a “spot”, then there’s still some products that can work!

The SANSI 36W Grow Lights are a personal favourite for this kind of thing – you get a screw-in bulb as well as a decent spread of high quality visible light. Put one or two of these lamps in your setup at a distance of about 30-45cm and you can’t go wrong!

These lamps will all work in any type of setup – so it’s worth just finding what fits your setup and budget.


UVA

Often UVA simply isn’t catered for in reptile keeping. Many zoos are still only just waking up to the fact that it’s been missing from animal care for decades. And although animals can survive without it, UVA is an important part of the full spectrum approach. Though it should only really be implemented after a keeper has got the UVB, IR, and Visible Light correct.

Would it surprise you if I told you that you are colourblind? Well, technically you might not be…but you are compared to your dragon! [8]

Would it surprise you if I told you that you’ve been lied to by the manufacturers of reptile products? Well, technically you’ve not…but I don’t think you’ve been told the whole truth.

You can’t see UVA – it exists outside your vision. But to a beardie, UVA is another ‘colour’ that they can see just as well as you may be able to see red, blue, green, or purple! Often, plants utilise this extra colour by producing flowers that are vibrant to animals that can see UVA – such as bees. [9]

UVA can signal to a beardie on a high quality basking location.

There’s even research into reptiles using UVA as a way of navigating the world. – The way UVA is scattered in the sky can produce “stripes” of colour, and these stripes can be used as a way of finding a way home, just like how old human navigation systems used the stars! [10]

“My lamp says that it provides UVA already”, I hear you cry. Yes, it may well do – but it probably doesn’t do it as well as you think! Without getting too technical, the UVA produced by most lamps is lacklustre, and not full spectrum in the slightest!

There is a type of lamp that shines (see what we did there?) in this area, it’s called a Metal Halide Lamp. They’re sometimes called Hight Intensity Discharge (HID) lamps. And they really are the only way of providing proper UVA to an enclosure without using the sun.

The biggest problems with these lamps is that they aren’t cheap to set up and can also get a bit technical to set up. You’ll need a special piece of equipment called a ballast – it’s an electrical device that provides bursts of high power to the inner workings of the lamp to make it turn on, a process called ‘igniting the lamp’.

When they turn on, a few reactions take place and they can even make a spluttering noise similar to a small tin can being dropped on the floor – weird I know. After a few moments of warming up they produce a bright, clean, white light. The output also contains that all important UVA.

Possibly our favourite ballast is the Mega Ray Dimming Ballast because it can be used with different wattages of Metal Halide Lamp

Because of the reactions taking place, there is some sensitivity in these lamps. This means that after they’ve been turned off (by accident or on purpose), they can’t turn back on again for up to 15 minutes. So you have to be careful with them as not to put them on a thermostat.

Nothing is ever easy, is it?

There’s so many of these to choose from. Which ballast, which lamp? Do I need one with a lizard on the box?

The ballast you use plays a huge role – but I like the ones with variable wattages, such as the Mega Ray Dimming ballast. If you use this, you can switch the output to match the lamp you buy, 35W, 50W or 70W.

The Philips Master Colour 942 Halide is arguably the best UVA-producing lamp we’ve tested.

Let’s try to keep it simple… In my experience the best for UVA output are the “human-grade” lamps , and the crème de la crème is the Philips Master Colour 942, but a close second is the GE Constant Colour CMH 842. Our general recommendations are….

I’d recommend the following:

Type 1 Enclosure – Not recommended
Type 2 Enclosure – Mega Ray Halide (35W)

Type 3 Enclosure – GE Constant Colour 842 (70W)
Type 4 Enclosure – Philips Master Colour 942 (70W)


I’ve got the lamps, now what?

So, you’ve decided what lamps you want to use. And at the very least you have provision for UVB, IR, and Visible Light. If you wanted to “supercharge” your full spectrum setup, you’ve also got good provision for UVA – such as the HID lamp.

The thing we need to do now is set them all up.

Remember, our aim is to provide a full spectrum – and an area of “sunlight”. This means that this basking area should contain all the elements that we’ve spoken about – UVB, IR, Visible Light, and if we’re using it, UVA.

In practice, this means placing the different lamps in close proximity in order to get the benefits from each one. This will create that nice full spectrum basking area that we’re after.

I like to have the lights in one area, taking up no more than 50% of the enclosure. This way, the dragon will always have the option to move into shade if they want to. This can be done in most enclosures, but is easier to do in a larger enclosure.

For the sake of keeping it simple, I’ll use the example that your enclosure is a Type 4 with a rectangular shape. And I’ll presume that it’s properly kitted out with plants, hides, and food/water dishes.

We’ve got a mini animation to try and illustrate a possible setup below. This is an example, so it’s not to scale.

As you can see, if you utilise the range of lamps that we’ve recommended all in one area, you can create a nice full spectrum basking area!

The aim here is that you’re creating a patch of full spectrum sunlight in the enclosure, big enough to completely cover your beardie in light. Your scaley friend then gets all the benefits of each specialised lamp (and each specialised category of light) all at the same time – just like in nature. And your dragon can choose to expose themselves to as much or as little light as they want, because there is a gradient down to a “shaded” area on the other end of the enclosure.

Of course, if you have a larger beardie, such as a true German Giant, you may need multiple of each lamp. You could end up needing a few heat lamps, for example, just to cover them completely in light.


An alternative method

The biggest problem with the full spectrum setup is that you can quickly end up with a jumble of wires and plugs, and this can be unsightly for you. Obviously, the dragon doesn’t care about this, but we always have to consider what you (the keeper) wants too – there’s no point in having an enclosure if you don’t like the look of it!

There is a product on the market that can help to tidy this slightly. It’s not perfect, but it can certainly work.

Arcadia have the ThermalZooPro. It’s a sleek black unit, approximately 70cm x 30cm. And it’s got a bunch of different specialist lamps built in. It can act as a nice “plug and play” basking rig.

The ThermalZooPro consists of 4 different lamps

There’s two different types available “off the shelf”. I’d recommend the unit that comes with the Jungle Dawn LED. But the lamps can be adjusted to suit your needs.

However, this basking rig does have some problems. The size might look impressive, but really if your beardie is much bigger than around 20cm (Nose to vent) then the ThermalZooPro is probably too small. It also needs to be hung, so if your enclosure is in the house you might not want to hang the tension cords from your ceiling!

The ThermalZooPro is a nice piece of kit, and can work perfectly for some setups – but not all of them. It could work on a Type 4 enclosure very nicely!


Conclusion

As you can see, there’s a huge rabbit hole of information when it comes to lighting a dragon. This article wasn’t comprehensive – we hardly scratched the surface.

If you’re going to try and light your enclosure on your own, we highly recommend staying away from most of the Facebook Groups. There are of course plenty of good groups – but it would be unfair to just include links to a few without upsetting the others.

And you should consider that a lot of the information you see on webpages is written by someone who doesn’t specialise in reptile lighting the same way that I do. Many of the forums or Facebook groups are managed by people who have kept these animals for 30+ years but not changed their husbandry at all in that time. This is no different to imagining a doctor that is still practicing medicine from 30 years ago.

Times have changed, even from as little as 2 years ago! The scientific community is only just learning about the benefits of bright full spectrum lighting. As a part of that community, I aim to bring you real advice about modern lighting techniques.

This article should be taken with a pinch of salt. It’s impossible to cover all the possibilities in one article. I’d highly recommend getting professional advice on your setup or plans. This is the only real way to ensure that you’re properly lighting your bearded dragon.

Lighting isn’t everything though. Don’t forget to provide a good diet, rich in plant matter [11] – with a wide variety of foods offered. This will keep your dragon healthy!

If you want to have a chat about your setup, get in touch for a private consultation. Let’s try to make the best setup possible for you and your reptile friend!


Literature and further reading

[1] World Health Organization. (2022). Radiation: The ultraviolet (UV) index

[2] Howard, Jonathon. (2019). Ecology of the Central Bearded Dragon (Pogona vitticeps). Ecology of the central bearded dragon (Pogona vitticeps) – Basking temperatures, Ultraviolet Index , humidity, diet, weight. length, reproduction, brumation and lifespan.

[3] Baines, Frances & Chattell, Joe & Dale, James & Garrick, Dan & Gill, Iri & Goetz, Matt & Skelton, Tim & Swatman, Matt. (2016). How much UV-B does my reptile need? The UV-Tool, a guide to the selection of UV lighting for reptiles and amphibians in captivity. Journal of Zoo and Aquarium Research 4(1): 42 – 63. http://www.jzar.org/jzar/article/view/150. Journal of Zoo and Aquarium Research. 4. 42 – 63.

[4] Holick, M. F (2016) – Biological Effects of Sunlight, Ultraviolet Radiation, Visible Light, Infrared Radiation and Vitamin D for Health. Anticancer Research 36: 1345-1356

[5] Tosini et al. (2001) – The circadian system of reptiles: a multioscillatory and multiphotoreceptive system. Physiology & Behavior 72 (2001) 461-471.

[6] Grace, Michael S. (1997) – The visual system and non-visual photoreception. The Biology Husbandry, and Health Care of Reptiles. Lowell Ackerman, DVM, ed. Vol. I, pp. 325-341.

[7] Sarika Paul and Timothy M Brown (2019) – Direct effects of the light environment on daily neuroendocrine control. Journal of Endocrinology, 243:1.

[8] Kelber, A., Vorobyev, M. & Osorio, D. (2003) – Animal colour vision – behavioural tests and physiological concepts. Biological Reviews, 78 81–118.

[9] James K. Bowmaker (2012) – Evolution of the Vertebrate Eye. How Animals See the World: Comparative Behavior, Biology, and Evolution of Vision 23 441–472.

[10] Fleishman, Leo & Loew, Ellis & Leal, Manuel. (1993). Ultraviolet Vision in Lizards. Nature. 365. 397-397. 10.1038/365397a0.

[11] Oonincx, D.G.A.B., van Leeuwen, J.P., Hendriks, W.H. and van der Poel, A.F.B. (2015), The diet of free-roaming Australian Central Bearded Dragons (Pogona vitticeps). Zoo Biology, 34: 271-277.